标准资料网-标准资料免费资源平台

Product Code:SAE AS4156
Title:Color-Coded Incandescent Flange Base T1 and T1-3/4 Lamps for Voltage Identification
Issuing Committee:A-20ac Crew Station And Interior Lighting Committee
Scope: This document defines the method for voltage identification by use of color coded insulators at the base of the lamp. Table 1 shows lamp part numbers and corresponding insulator colors. Insulator colors are to be easily distinguishable as red, yellow, and green. Tables 2 and 3 show complete descriptions of the lamps involved for the T1-3/4 and T1 lamps respectively. New lamp part numbers may be added by a revision process as required.Product Code:SAE J826
Title:Devices for Use in Defining and Measuring Vehicle Seating Accommodation
Issuing Committee:Human Accom And Design Devices Stds Comm
Scope:The devices of this SAE Standard provide the means by which passenger compartment dimensions can be obtained using a deflected seat rather than a free seat contour as a reference for defining seating space. All definitions and dimensions used in conjunction with this document are described in SAE J1100. These devices are intended only to apply to the driver side or center occupant seating spaces and are not to be construed as instruments which measure or indicate occupant capabilities or comfort. This document covers only one H-point machine installed on a seat during each test. Certified H-point templates and machines can be purchased from:SAE International400 Commonwealth DriveWarrendale, PA 15096-0001Specific procedures are included in Appendix A for seat measurements in short- and long-coupled vehicles and in Appendix B for measurement of the driver seat cushion angle. Specifications and a calibration inspection procedure for the H-point machine are given in Appendix C. Additional considerations are necessary when a Head Restraint Measuring Device (HRMD) is mounted to an H-point machine (Appendix D).